Scruton Marine Services
Scruton Marine Services
49 John Street, Port Dover, Ontario, N0A 1N7, Canada
Contact:Mike Scruton
Telephone: Reveal Telephone Number
Fax: Reveal Fax Number
Website:Visit Website
 
All Scruton Marine Services Listings

Scruton Marine is an international marine brokerage company located in Ontario, Canada. We have over 25 years experience sourcing and selling vessels, engines and equipment. Unlike some brokerages we are also experienced in operating commercial boats, barges, engines, etc. We have an extensive list of sources for all things marine including service providers for surveys, towing, salvage, marine construction, etc.


Current View: All Scruton Marine Services Listings (233)  |   Canadian Ships Listings Only (52)
Used Boats: 142 Adverts   Displaying: 1-50      Layout: Classic Gallery | Quick View | List View
    
   

2003 36' Fast Wood Fishing Charter SUPER FAST 2003 36’ x 12’ x 3.9’ Rowe Built Fishing Charter Boat All weather boat Built by Rowe Boat Yard in Brooklin, Maine Hull: 1 1/8” thick 4 layers of epoxied laminated wood Deck: Teak Bulkheads: 8 Engine: New 600hp Cummins Diesel Engine Transmission: ZF Gear, 1.5:1 ratio Shaft size: 2 1/4" Maximum speed: 34 knots Propeller: 24” x 24” , Nibral Generator: MASE 2.5KW, 85 hrs Fuel capacity: 370 gal Electronics: (1) VHF radio G... read more
20' x 8' x 3' Steel Barge/Push Boat NEW BUILD 20′ x 8′ x 3′ Steel Barge/Push Boat Base Model or Complete Model New Builds Base Model Price: $16,800 USD 1/4″ Mild Steel Shell 3″ x 3″ x 1/4″ Angle framing 2′ On Center Truss System 4 – 14″ Cleats 1 – Hatch Bare Steel Unit Unpainted Location: NY State Complete Model Price: $26,800 USD 1/4″ Mild Steel Shell 3″ x 3″ x 1/4″ Angle framing 2′ On Center Truss System 4 ... read more
2014 8′ x 24′ Pontoon Workboat w/ Trailer 2014 8' x 24' Pontoon Workboat w/Crane, c/w Trailer •Original frame is 1994 24' Rivera cruiser •Built from the frame up in 2014 •2 18' pontoons bolted in the center •10" draft, 2' molded depth •Custom steel center frame work and mounting plate for crane •Venturo 5k capacity 16' reach crane 12v DC self contained solar recharge - will run all day on the battery - very quiet •1 3500 lb capacity winch •Trailer is 2015... read more
1982 45' Gladding Hearn Built Crew Boat 1982 45' x 14.5' Gladding Hearn Built Crew Boat/Patrol Boat Steel hull/ aluminum cabin Twin QSM11 535hp ea Diesel Engines (yr 2000) Cruising speed: 20 to 26 knots 12KW generator Can carry up to 15 persons Boat has always been in fresh water Located in New York State Priced to sell at $155,000 USD Reference No. C2065... read more
Markey Single Drum Towing Winch Markey Single Drum Towing Winch Model TDS-32 Wire Size: 2″ Drum Capacity: 2100′ Style: Single Drum Line Pull: 120,000 Diesel driven – Detroit Diesel with Allison Gear Condition: Excellent – low hour, running takeout Built: 1982 Located in New York State Price: $164,000 USD... read more
2008 47' x 14.6' x 5' Steel Model Bow Tug 2008 47’ x 14.6’ x 5’ Steel Model Bow Tug Price: $400,000 CDN Built in Port Lambton, Ontario This tugboat is truckable Gross tonnage: 18.14 tons Net tonnage: 13.61 tons Shell plate thickness: 3/16” Framing: Tubing Bulkheads: 3/16” Headroom: Wheelhouse – 6.5’, Cabin – 7’, Engine room – 7’ Engine: Detroit Diesel 8V71T, 350 hp, 3000 hours Transmission: Twin Disc MG 5114 3:1 ratio Generator: 7.5kw Onan Shaft size: 3&rdquo... read more
2011 Mudcat 8" x 6" Aluminum Dredge 2011 Mudcat MC-910 Aluminum ENV Suction Dredge Principal Dimensions and Characteristics - Custom Built in 2011 - Length Over All: 11.62 m 38.11 feet - Width: 2.74 m 9 feet - Height Over All: 2.68 m 8.8 feet - Draft: 533.4 mm 21 inches - Floating Clearance: 1.80 m 5.9 feet - Fuel Capacity: 1,325 liters 350 gallons Floatation - Pontoons - (2) Two: 914.4 mm x 812.8 mm x 10.06 m 36 in. x 32 in. x 33 feet - .25” thick marine grade aluminum formed with Internal Bulkhea... read more
1971 45' x 14'6" x 4' Camcraft  Crew Boat 1971 45' x 14'6" x 4' Aluminum Camcraft Crew Boat Originally built for US Coast Guard Engines: Twin 8V71 Detroit Diesel Engines are fresh rebuilds - less than 100 hrs on each of them Transmissions: 2:1 ratio Top speed: 22 knots Set up for dual station steering Accommodations: 4 bunk beds Headroom: 6'8" Fuel capacity: 300 gals in two 150 gal tanks Watertight bulkheads: 4 Rear deck: Dimensions are 15' x 14' Head: Yes Comments from the owner:... read more
1954 45' X 13' X 5' Tug 1954 45′ x 13′ x 5′ Tug •Price: $75,000 USD •Gross Tonnage: 15, Net: 10 •Shell plating thickness: .245″ by ultrasonic testing •Headroom: 6′ pilot house, galley, engine room •Cruising speed: 10 knots •Powered by: Detroit 8V-71 Natural, 365 hp, 2200 hrs +/-, serial number 7082-3000, twin disc MG514654 4.5:1 •Generator: Lima electric with a 4-236 Bowman diesel, 20KW, 3 phase, keel cooled •Winches: 20 ton ex military hydra... read more
Used Almon Johnson Single Drum 100,000 lb Line Pull Winch Used Almon Johnson Single Drum 100,000# Line Pull Winch 2100 ft of 2" wire Speed: 30 feet per/ min Single drum Weight: 35,000 lbs Removed from Great Lakes tugboat during conversion In very good condition Located in New York State Price: $39,000 USD Reference No. WH2098... read more
1974 112.6' x 34' x 11.1' 4300 HP Tug  (SMS T2372) 1974 112.6' x 3' x 11.1' 4300 HP Tug Twin Screw, Offshore Towing Vessel Last load line March 2012 Gross Tonnage 98 Net Tonnage 66... read more
2008 60' x 16' Tri-toon Passenger Vessel 2008 60′ x 16′ Tri-toon Passenger Boat Price $295,000 USD •Built in Florida •Draft is 4.4′ to bottom of stern drive •Comfortably accommodates 15-20 on top deck, 20-30 on lower deck •Pontoons are 42″ in diameter, 1/8″ aluminum and 5′ long sections with water tight compartments and an inspection port in each pontoon •Powered by twin Yanmar 200 hp, 4 cyl diesel engines with Mercury Bravo II stern drives •Engines are locat... read more
1999 27' x 7' Hike Built Aluminum Patrol Boat w/Trailer 1999 27′ x 7′ Hike Built Aluminum Patrol Boat w/ Trailer Price: $35,000 USD •Draft less than 2′ •Powered by: twin 150hp Evinrude Etec outboards, installed in 2004. Approximately 865 hours on each. 4 Blade Stainless steel props *(when serviced Nov 2018, water was found in the lower unit. May need new seals) •Hard-mounted Darley Fire pump, Model 2BE18 “Vanguard” plumbed with through‐hull suction and removable hard suction line for dewatering. 2.... read more
Rebuilt  CAT 399 Marine Engine - 1200hp @1225 rpm Rebuilt CAT 399 Marine Engine - 1200 hp @ 1225 rpm Serial No. 9181120 Arrangement No. 3N1198 Separate circuit after cooled Air start Rebuilt and test run only March 2006 Engine is in new condition Additional information: • Rebuilt and test run hours only March 2006. • Complete disassembly to bare block and all tolerances restored to new condition. • Block cleaned and inspected, 3 liner bores have “L” inserts. • Engine previously powered Fish boat, MAX R... read more
PROJECT BOAT - 1950 38' Russel Bros Tug 38′ x 10′ Russel Brothers Project Boat •Price: $15,000 CDN •Molded depth 5.5′, Draft 4′ •Headroom: Wheelhouse – 6.5′, Cabin 6.5′, Engine room 6.5′ •Shaft size: 1 3/4″, 29″ prop •Cruising speed: est 9 knots •CAT engine, hours unknown, 200hp •Twin disc transmission •Fuel capacity: 200 gallons •Accommodations: room for 1 or 2 •Brass wheel and throttle Location: Northern Ontario... read more
2019 8′ x 20′ Push Boat 2019 8′ x 20′ Push Boat • 10 gauge steel •Light draft approx. 8″ •With console, push knees, motor bracket, 1 coat primer •1 hatch •Framed on 16″ •Price $13,000 CDN •Located in Port Dover, Ontario File W2367... read more
34' X 10' Work Boat Hull 34' X 10' X 3.5' Steel Work Boat Hull No power Was powered by a pair of 6 cyl Owen gas engines Located in Southern Ontario... read more
1997 55' x 15' x 1.5' Alum Crew Boat/Blt in UK 1997 55' x 15' x 1,5' Aluminum Catamaran Crew Boat Overall length: 55' Registered length: 48' Gross tonnage: 7 Built in UK Seating capacity: 40 PAX Deck space: 12' Twin Iveco Diesels - Model No. 8061 - 270 hp each Propulsion: Hamilton Water Jets Cruising speed: 18 knots Fuel capacity: 1000 gal Navigation equipment: VHF Radio, GPS, Radar, Compass Accommodations for 2 (Cannot be used commercially in USA) Located in Mississippi Price: $215,250 USD R... read more
2006 1000 HP Tug/28 ton BP 2006 30.20m x 8.60m x 3.60m 28BP Tugboat Classification : NK Class Construction : ABS Grade A mild steel Port of Registry : Sarawak, Malaysia Year Built : 2006 Gross Tonnage : 269 tons Net Tonnage : 81 tons Length, overall : 30.20 meter Beam, MLD : 8.60 meter Depth MLD : 4.30 meter Draft... read more
New 40' Rear Cabin Alum Landing Cra New 40' x 142" Aluminum Rear Cabin Landing Craft (3) independent air chambers Twin 300hp 4 stroke Suzuki outboards 3600 LP Onan Generator Commercial RV rooftop AC Enclosed 144"L x 100"W x 8'H cabin Hydraulic bow gate Located in Missouri Custom built 40’ long x 142” wide rear cabin landing craft hull, 20 degree dead rise, twin outboard, with integrated motor flotation pod, formed gunnel tops and 3 independent air chambers. This hull is custom designed... read more
1904 46' Steel Model Bow Tug 1904 46’ x 13’ x 6’ Steel Model Bow Tug Built in England in 1904 This vessel served in World War 1 and World War 2 Tug has been used in Ontario for towing logs This is an excellent sea boat Hull is riveted and all seams have been welded Hull is in great condition A new nose piece has been added for pushing Powered by 6-71 Detroit Diesel (1986) c/w 2:1 gear (1986) Shaft size: 2 ¼” Prop: 30” x 23”, 3 blade. LH, bronze (this tug can take up to ... read more
42' Steel Shugart Push Boat 1987 42' x 14' x 3' STEEL SHUGART PUSH BOAT -MFG BY SHUGART MANUFACTURING -VESSEL IS COMPRISED OF 4 SECTIONS THAT ARE PINNED TOGETHER -VESSEL CAN BE PINNED TO SHUGART TYPE SECTIONAL BARGES -PILOT HOUSE AND ENGINES ARE EASILY REMOVED -VESSEL IS TRUCKABLE -ALL EQUIPMENT/MACHINERY IS ABOVE DECK - NO BILGE - HULL IS SEALED -POWER: 2 DETROIT 471 POWERING HYDRAULIC AZIMUTHING TYPE PODS -KAPLAN STYLE PROPELLERS IN NOZZLE/POD - RECON FALL 2010 -REMOVEABLE PUS... read more
New 33' x 11' Aluminum Landing Craft - to be built New 33' x 11' Aluminum Landing Craft - to be built Can be powered by I/O diesel engines or outboard motors Diesel engines can be cooled by keel coolers or radiators on the roof. Wheelhouse is 6' x 6' Gate is 7' wide by 4' long This landing craft work boat can be customized to suit buyer's needs. A photo of similar LC is shown above To be built in Ontario, Canada Price on request Reference No. LC2110... read more
1928 26.5' Steel Replica Tugboat 1928 26'6" x 8' x 3.6' Steel Replica Tugboat 27' tugboat replica Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water. All supporting and historical documents will be supplied to buyer at time of sale. Original boat is constructed of 1/4" steel Original hull is galvanized at waterline Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate Original hull is riveted and was built... read more
26 Steel Twin Screw Work/Tow Boat 1993 26' x 11' x 3.5' Steel Twin Screw Work/Tow Boat 9 gross tons 2 x 4-53 Detroits with low hrs Propellers: 24" x 24", 4 blade props Cruising speed: 16 kts Maximum speed: 18 kts 200 gal fuel capacity. Twin 100 gal tanks, Duplex Raycor 1000 filters Hydraulic Steering Electronics: Raytheon Radar, Depth Sounder, VHF Running and tow lights Trailerable Originally was used to move a 110' x 30' barge with 40 ton crane Located in New York State Price rec... read more
33' x 10' Steel Workboat With Winch 33' X 10' Workboat With Winch Cummins motor Fitted with a winch Located in Quebec Price: $13,250 CDN... read more
42.5' Aluminum Crew Boat 1968 42.5' x 14.5' x 3'10" Ex U.S. Army Corps of Engineers Crew Boat Engines: Twin 8V-71 Detroit Diesel engines - total 600 hp- to be installed Transmissions: Twin Allison transmissions Generator: 20KW genset Fuel capacity: 1,000 gal Accommodations: No Head: Yes COI: This crew boat was used by U.S. Army Corps of Engineers and was not subject to COI Additional information: The forward hull is fitted with an angle iron spray rail in way of the port and starboard side... read more
1969 73' x 17' Halter Built Work Boat 1969 73' x 17' x 10' Halter built Aluminum Work Boat Price: $230,000 CDN Built by Halter Boats, New Orleans, LA Gross tonnage: 43 tons Net tonnage: 32 tons Shell plate thickness: 5/16" Framing: 3" x 5/16" @ 1"C Bulkheads: 1/4" Headroom: Wheelhouse & Cabin - 6'4", Engine room - 5' Last survey: 2012 (Transport Canada) (2) Detroit Diesel 4 stroke, 6 cyl 60 Series - - total 1050 hp, year 2008 (2) Twin Disc MG 514A 2.5:1 gears ... read more
New 20' x 8' x 30" Steel Barge - READY TO SHIP 2018 20′ x 8′ x 30″ Barge (Other sizes available call for a quote) Price: $10,750 CDN •Ready to ship •10 gauge shell •Framed on 16″ •1 deck hatch •4 cleats •Raked on one end •Capacity 9000 lbs •Weight approx. 3500 lbs Location: Port Dover, Ontario... read more
83.5' x 20.5'  1600 hp Towing Tug 1963 83.5′ x 20.5′ x 8 ‘1600 hp Tug Price $149,000 USD •GRT: 117.45, Net: 88.09 •Bollard pull: 13 metric tonnes •Range: 4000 nm @ 8 knots in calm water •Max speed: 12 knots •Fuel capacity: 16,000 litres •Powered by: 2 MWM Deutz engines •Last dry dock July 2014 for bottom painting, inspection, maintenance and repairs – hull and underwater propulsion and steering equipment inspected and approved at that time by Transport Canada ... read more
1955/2008 65' PAX Boat & Busine TURNKEY PASSENGER VESSEL, With BUSINESS, FOR SALE 65’ x 16’ x 5.5’, 46.50 Gross Tons, Russel Bros. built 1955 ex. "Maid of the Mist" passenger vessel AGCO/LLBO Liquor license transferable to new owner Certified for 64 passengers and 4 crew in Minor Waters II/ Sheltered Waters Built in 1955 by Russel Hipwell, Owen Sound, Ontario Hull was originally built to be used as an Arctic Research Vessel – very heavily built 2 x D333C Caterpillar engines NorPro 9 KW ... read more
(2) 1988 195' x 35' x 12' Jumbo River Hopper Barges (2) 1988 195′ x 35′ x 12′ Jumbo River Hopper Barges •Box ends •Fair Condition •Need some steel work •Location: New York State Details are deemed to be correct but are not guaranteed and should be independently verified.... read more
146' x 38' x 17.5' Cape Class Hopper Barge 146′ x 38′ x 17.5′ Cape Class Hopper Barge •5′ bin walls •Good condition •Heavily built •Built 1950, Dry docked in 2017 •Location: New York State Details are deemed to be correct but are not guaranteed and should be independently verified.... read more
PROJECT BOAT - 1945 35' Russel Bros Alligator Boat 1945 35′ x 9′ Russel Brothers Alligator Boat – Project Boat •Price: $15,000 CDN •Molded depth 4′, Draft 3′, Height 10.5′ •Shell Plating: 1/4″ •Headroom: Wheelhouse – 7′, Cabin 7′, Engine room 6′ •Shaft size: 1 1/2″, 28″ prop •Cruising speed: est 9 knots •Cummins engine, hours unknown, 200hp •Winch is Russel Bros 50hp, 75 rpm, model 93 •Fuel capacity: 200 gallons &b... read more
1976/2004 60.99' Steel Crew Boat 1976/2004 60.99’ x 16.99’ x 7.48’ Steel Crew Boat Built in 1976 by Halter Marine, Louisiana Rebuilt in 2004 – 50% of the steel plate on hull was replaced Gross tonnage: 39 tons Net tonnage: 29 tons Shell plate thickness: 3/16”/1/8” Bulkheads: 3 Headroom: Wheelhouse – 6’2”, Cabin – 6’6”, Engine Room – 6’ Engines: 2 x 12V71T Detroit Diesel engines – total hp 950 – rebuilt in 2003 – 500 hou... read more
1976   134'9  x  29'  LCU 1976 134'9 x 29' LCU •Price: $525,000 USD •4.5' draft •Powered by twin 12v71s •Props are steerable kort nozzles with flanking rudders •(2) 40 kw 3-71 generators •200 ton cargo capacity •18' between the walls •Accommodations for 8 •Updated interior, galley, shower, head •Hydraulic bow spud •2,000 lb stern anchor with winch •For sale or charter •Located in New York State Details are deemed ... read more
1977 50' x 15' Aluminum 98 Passenger Tour/Dinner Boat 1977 50′ x 15′ Aluminum 98 Passenger Tour/Dinner Boat Price $325,000 CDN •98 passengers plus 3 crew •Built in Canada •Last survey 2012 •Aluminum construction •3/16″ shell plating thickness •Gross Tonnage: 56.46 tons •5’2″ Moulded depth, 30″ Draft •Cruising speed 10-12 knots •Two Volvo Penta AQAD-41, 2 x 180 hp, 3000 hours since last rebuild •Twin Volvo Penta stern drives 1.61:1 ratio •Gener... read more
1960 43' Ex USCG Charter/Dive Boat 1960 43' x 14' x 3.5' EX USCG Fiberglass/Wood Composite Charter Boat/Dive Boat Seating for 45 passengers Built in Newport Beach Last survey: 2010 Molded depth: 5.5' Gross tonnage: 13 tons Net tonnage: 10 tons Hull thickness: 1" Bulkheads: 3/4" thick Headroom in Wheelhouse: 6', Engine room: 3' with deck hatch Engine: 6 cyl Cummins, 250 hp, year 2002 Transmission: Twin Disc Shaft size: 2" Propeller: 25" x 20" Steering: Hydraulic Cruising speed: 10 knot... read more
Timberland Double Drum Winch - 27,000 # Line Pull Timberland Double Drum Winch – 27,000 # Line Pull • Timberland model 400-2-25 • 2 drums 36” x 54” • 27,000 lb. Line pull • Deutz Diesel – 6 cylinder with reverse transmission • C/w cabin • Brake and safety lock • Completely rebuilt • Located in Quebec • Price $98,500 CDN Reference No. WH2018... read more
Timberland Winch - 200,000 lbs Timberland Winch - 200,000 lbs Located in Quebec, Canada Price: $262,500 CDN Reference No. W2097... read more
5 Drum 35 ton Madill Winch 5 Drum 35 ton Madill Winch Built by S. Madill, Nanaimo, BC Model # 5-30024 Single Line Pull – 35 tons 5 drums Powered by 4-71 Detroit Diesel Winch & engine have been completely refurbished Never used since rebuilt Located near Port Dover, Ontario, Canada Price reduced from $60,000 CDN to $42,000 CDN Reference No. WH2075... read more
1964/2010 40' Dyer Classic Launch 1964 40’ x 12’ x 3.5’ Heavy Fiberglass Dyer Classic Launch Could be used commercially Gross tonnage: 7? tons Heavy fiberglass hull – 1” thick Bulkheads: 3 Cummins B Series Diesel engine – 185 hp – engine has just been rebuilt Rebuilt Paragon transmission Shaft size: 1 ¼” Propeller: 16” Cruising speed: 10 knots Located in New York State New Price $69,000 USD Reference No. P2334... read more
1969 46' X 14' Twin Screw Push Tug 1969 46’’ x 14’’ x 6’’ Twin Screw Steel Push Tug •Price $65,000 USD •Twin D-333A Turbo Diesel EnginesTug is in good working condition •Truckable •Located in State of Michigan – on Lake Huron File ref T2267... read more
1973 35' Twin Screw Alum Dive Boat 1973 35' x 12' x 3.2' Twin Screw Aluminum Crew/Dive Boat w/COI for 14 persons USCG COI for 14 (12 divers plus 2 crew) Built in Laurelville, LA in 1973 Gross tonnage; 11 tons Net tonnage: 8 tons Last survey: July, 2010 Shell plating thickness: 1/4" Molded depth: 4.7' Twin John Deere engines - Model 6068-300, 300 hp each, year 2002, 728 hrs Transmission: Twin Disc 1.5:1 ratio Shaft size: 2" Cruising speed: 24 knots Fuel capacity: 400 USG Fuel consumption... read more
1999 54' x 14' Steel 49 PAX Water Taxi 1999 54' x 14' x 36" to 50" max Steel 49 Passenger Water Taxi Certified to carry 49 passengers. COI is current Built in LaCrosse, Wisconsin Shell plate thickness: 3/16" Headroom: Wheelhouse - 7', Cabin - 7', Engine room - 4' Air draft: 7'4" (2) Mercruiser I/O with Bravo 2 outdrive - 200 hp ea Hours: Port engine - 6400 hrs, Starboard engine - 1600 hrs Steering: Hydraulic Cruising speed: 7.5 knots Westerbeke 10KW generator Electronic... read more
NEW PRICE! 127' x 28'  Steel Converted Ex CCG Vessel/Liveaboard Yacht 1960 127' x 28' x 10' Steel Converted Ex CCG Vessel/Liveaboard Yacht Has been used as a training, expedition, research vessel Has been used in fresh water since 1985 Presently registered as pleasure craft Ice strengthened hull (Class II ice breaker) Gross tonnage: 390 Net tonnage: 155 Twin Fairbanks Morse engines - 640 HP each Propellers: 6' x 6' Cruising speed: 9.5 knots Fuel consumption: approx 40 gal per hour (2) Westinghouse generators & motors -... read more
1918/1974 120' - 200 Passenger Vessel**Now licensed to serve alcohol 1918/1974 120' x 26' 200 Passenger Steel Tour Boat Price Vessel: $126,000 CDN Price Vessel plus Business: $138,500 CDN Licensed to serve alcohol. AGCO licensed as a dockside venue Would make an excellent passenger vessel for sheltered waters, stationary floating restaurant or a spacious private yacht or floating cottage. Built in Port Arthur, Ontario Annual Transport Canada Safety Inspection May 2014 Moulded depth 13.5', draft 6' bow, 9' stern Gross Tonnage: 24... read more
42.5' Ex Army ST Tug 1944 42.5' ST Ex Army Tug US Documented Tug 8V92 Detroit Diesel Engine Twin Disc 514 Gear - 4.5:1 ratio 52" five blade bronze propeller Kubota 6 KW generator Full electronics Major hull and machine work completed early 2001 Fully operational Recent haul out Needs a good clean up and paint Additional equipment: EPIRB, two survival suits, 300 foot hawser poly pro. Located in Massachusetts Price $60,375 USD Scruton Marine Services - File No. T2298... read more
1983 62' Stapleton Fishing Charter Boat 1983 62' x 18' x 5'8" Stapleton Fiberglass Fishing Charter Boat Gross tonnage: 50 tons Net tonnage: 40 tons Built by Stapleton Boats, Florida Last survey: 2009 Depth of hull: 7' Draft: 5'8" Hull thickness: 2" Bulkheads: 1" fiberglass Headroom: 6' Twin Detroit Diesel 8V-92 engines - 400 hp each, rebuilt in 2006 Twin Disc 2:1 transmissions Shaft size: 2.5" Propellers: (2) 32" x 25", 4 blade, bronze props Steering: Hydrau... read more
2006 23.35m Damen Shoalmaster 2308 Tugboat 2006 23.35m x 8.64m x 2.99m "Damen Shoalmaster 2308" Tugboat Built 2006 in Holland Basic fundtions: Towing, survey, anchor handling, dredge & coastal construction support GT/NT: 123GT/ 37 NT Class : Bureau Veritas M/E : 2 x Caterpillar3412D engines - total 1720 bhp at1800 rpm Speed: 10.5 knots TBP : 22 Bowthruster : 1 x Kalkman 120 hp Propulsion : 2 x Promarin fixed pitch propellers Generator sets: 2 x Hatz 30KVA, 50HZ 1 x CAT C9, 187KW Com... read more


3 Pages:  1  | Next